Crucial MTFDDAK128MBF-1AN12ABYY Fiche technique Page 14

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 37
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 13
Table 13: TCG/Opal Support Parameters (Continued)
Property Supported? Comments
ACK/NACK Support Not Supported Session reliability
Async Support Not Supported Asynchronous protocol support with multiple com-
mands per session
Geometry Reporting Feature
ALIGN Supported OPAL 2.0 (only)
Logical Block Size 512 bytes Logical block size = 512 Bytes
Alignment Granularity 4096 Bytes Page or Descriptor size <<Minimum AES LU size>>
Lowest Aligned LBA 0
OPAL SSC V2.00 Feature Descriptor
Base COM ID 0x1000 0x1000-0xFFFF defined for COM ID management
Number of COM IDs 1
Range Crossing Behavior 0 If drive receives a READ or WRITE command that
spans multiple LBA ranges and the LBA ranges are
not locked, then:
1. Process the data transfer, if Range Crossing = 0
2. Terminate the command with “Other Invalid
Command Parameter” if Range Crossing = 1
Number of Locking SP Admin Authorities
Supported
4 As per OPAL 2.0, drive should support at least 4 ad-
min
Number of Locking SP User Authorities
Supported
16 As per OPAL 2.0, drive should support at least 8
users
Initial C_PIN_SID PIN Indicator 0x00 0x00 = The initial C_PIN_SID PIN value is equal to
the C_PIN_MSID PIN value
0xFF = The initial C_PIN_SID PIN value is VU, and
MAY not be equal to the C_PIN_MSID PIN value
OPAL 2.0 (only)
Customer-specific SID – Configurable
Behavior of C_PIN_SID PIN upon Ter Revert 0x00 0x00 = The C_PIN_SID PIN value becomes the value
of the C_PIN_MSID PIN column after successful in-
vocation of revert on the admin SP’s object in the
SP table
0xFF = The C_PIN_SID PIN value changes to a VU
value after successful invocation of revert on the
admin SP’s object in the SP table and MAY not be
equal to the C_PIN_MSID PIN value OPAL 2.0 (only)
DataStore Table Feature
Maximum number of DataStore Tables 16 The maximum number of the DataStore tables that
the TPer supports, including the DataStore table
defined in OPAL SSC 2.0
Maximum total size of DataStore Tables 90MB Specifies the maximum total size in bytes of all of
the DataStore tables that TPer supports, including
the DataStore table defined in OPAL SSC 2.0
MBR Table 128MB
M600 2.5-Inch NAND Flash SSD
TCG/Opal Support
PDF: 09005aef858ae778
m600_2_5_ssd.pdf - Rev. E 3/15 EN
14
Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2014 Micron Technology, Inc. All rights reserved.
Vue de la page 13
1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 36 37

Commentaires sur ces manuels

Pas de commentaire